___________________________________________
Before start the overhaul according to the manual there is some action to be taken, and these actions are known as some primary preparations before an overhaul. Now lets take a look at about the actions mentioned before,
Clean oil, grease, dirt and dust from transmission.
Remove the drain plug to drain oil. Tighten the engine oil drain plug after draining.
Rotating parts should be coated with oil prior to assembly.
All disassembled parts, if to be reused, should be reinstalled in the original positions and directions.
Always use new ones for gaskets, lock washers and lock nut.
Liquid gasket should be applied where specified to prevent leakage.
No comments:
Post a Comment